KES 595,000
β In StockThe Quattro a combined inverter and charger. Additionally it can accept two AC inputs and automatically connect to the active source. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology plus multiple system integration features such as three or split phase operation and parallel operation
π Secure Payments
M-Pesa Supported
π Fast Delivery
Across Kenya
π‘ Warranty
Guaranteed cover
Energy Inverter/Charger
The Quattro can be connected to two independent AC sources, for example the public grid and a generator, or two generators. The Quattro will automatically connect to the active source.
The main output has no-break functionality. The Quattro takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, like a water heater for example, can be connected to this output.
A split phase AC source can be obtained by connecting our autotransformer (see data sheet on www.victronenergy.com) to a European inverter programmed to supply 240 V / 60 Hz.
The Quattro can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available.
Three units can be configured for three phase output. But thatβs not all: up to 4 sets of three 15 kVA units can be parallel connected to provide 144 kW / 180 kVA inverter power and 2400 A charging capacity.
The Quattro is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (16 A per 5 kVA Quattro at 230 VAC). A current limit can be set on each AC input. The Quattro will then take account of other AC loads and use whatever is spare for charging, thus preventing the generator or mains supply from being overloaded.
Settings can be changed in a matter of minutes with VEConfigure software (computer or laptop and MK3-USB interface needed). Several monitoring and control options are available: Cerbo GX, Ekrano GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart dongle), Battery Monitor, Digital Multi Control Panel.
Install a Cerbo GX or other GX product to connect to the internet. Operational data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. When connected to the internet, systems can be accessed remotely, and settings can be changed.
| Specification | 12/3000/120-50/50 | 24/3000/70-50/50 | 12/5000/220-100/100 | 24/5000/120-100/100 | 48/5000/70-100/100 | 24/8000/200-100/100 | 48/8000/110-100/100 | 48/10000/140-100/100 | 48/15000/200-100/100 |
|---|---|---|---|---|---|---|---|---|---|
| Battery | |||||||||
| Nominal Battery Voltage | 12V | 24V | 12V | 24V | 48V | 24V | 48V | 48V | 48V |
| AC Input | |||||||||
| PowerControl / PowerAssist | Yes | ||||||||
| Integrated Transfer Switch | Yes | ||||||||
| AC Inputs | Input Voltage: 187β250VAC β’ Frequency: 50/60Hz β’ Cos Ξ¦ > 0.8 | ||||||||
| Maximum Feed Through Current (A) | 2 Γ 50 | 2 Γ 50 | 2 Γ 100 | 2 Γ 100 | 2 Γ 100 | 2 Γ 100 | 2 Γ 100 | 2 Γ 100 | 2 Γ 100 |
| Inverter | |||||||||
| Input Voltage Range (VDC) | 9.5 β 17V | 19 β 33V | 38 β 60V | ||||||
| Output Voltage | 230VAC Β±2% β’ 50Hz Β±0.1% | ||||||||
| Continuous Output (VA) | 3000 | 3000 | 5000 | 5000 | 5000 | 8000 | 8000 | 10000 | 15000 |
| Continuous Output (W) | 2400 | 2400 | 4000 | 4000 | 4000 | 6400 | 6400 | 8000 | 12000 |
| Peak Power (W) | 6000 | 6000 | 10000 | 10000 | 10000 | 16000 | 16000 | 20000 | 25000 |
| Maximum Efficiency | 93% | 94% | 94% | 94% | 95% | 94% | 96% | 96% | 96% |
| Charger | |||||||||
| Absorption Voltage | 14.4V | 28.8V | 14.4V | 28.8V | 57.6V | 28.8V | 57.6V | 57.6V | 57.6V |
| Float Voltage | 13.8V | 27.6V | 13.8V | 27.6V | 55.2V | 27.6V | 55.2V | 55.2V | 55.2V |
| House Battery Charge Current (A) | 120 | 70 | 220 | 120 | 70 | 200 | 110 | 140 | 200 |
| General | |||||||||
| Auxiliary Output (A) | 25 | 25 | 50 | 50 | 50 | 50 | 50 | 50 | 50 |
| Programmable Relay | 3 Γ | ||||||||
| Communication | VE.Bus β’ 2Γ General Purpose Ports β’ Remote On/Off | ||||||||
| Operating Temperature | -20Β°C to +60Β°C | ||||||||
| Maximum Altitude | 2000m | ||||||||
| Enclosure | |||||||||
| Protection | IP20 | ||||||||
| Weight (kg) | 19 | 19 | 34 | 30 | 30 | 45 | 41 | 51 | 72 |
| Dimensions (H Γ W Γ D mm) | 364Γ295Γ221 | 364Γ295Γ221 | 470Γ350Γ280 | 470Γ350Γ280 | 470Γ350Γ280 | 444Γ328Γ240 | 444Γ328Γ240 | 470Γ350Γ280 | 572Γ488Γ344 |
| Standards | |||||||||
| Safety | EN-IEC 60335-1 β’ EN-IEC 60335-2-29 β’ EN-IEC 62109-1 | ||||||||
| Emission / Immunity | EN55014-1 β’ EN55014-2 β’ IEC61000 Series | ||||||||
